Regardless of how it sounds, the job of applying epoxy floor paint can, indeed, be quite intricate and convoluted. Thus, if you are working on the same for the first time in your life, you might make a grave mistake. Hence, we recommend choosing a proficient floor paint service provider should be an ideal option for you. However, you would still need to know the steps of the job, especially if you want to supervise them properly. Hopefully, the following guide will help you out in this aspect!
5 Steps For Application of Epoxy Floor Paint
Step: 1 – Put the Surface in Order
Firstly, you will need to prepare the substrate of the flooring properly. With it, you can ensure the adhesion between the substrate as well as the epoxy floor paint. The most suitable method in this aspect will be diamond-grinding or sanding. However, if the surface has been contaminated with oily substances, it might require chemical cleaning. The objective is to make the surface smooth and seamless.
Step: 2 – Clean the Floor Thoroughly
After preparing the substrate properly, you will need to clean it as meticulously as possible. You can use an industrial vacuum cleaner in this aspect. It will accumulate both larger and smaller dust particles and keep everything spotless and fresh.
Making the substrate clean before using the epoxy floor paint is imperative for you. Otherwise, the dirt particles might get trapped in between the coating and weaken the adhesion significantly. So, you will not have to use a huge amount of primer as well.
Step: 3 – Begin Priming
The next step is priming the whole flooring. It will strengthen the adhesion even more and prolong the life of the substrate. Furthermore, it will also seal the flooring and lower the risk of the emergence of gas and bubbles.
Priming can also reduce the amount of product, which is going to be used in the later period. However, while you are priming, just be sure to check out the same ventilation’s overall ventilation in a proper manner. Also, use an electric mixer to amalgamate the primer proficiently.
Step: 4 – Fill Up the Cracks and Holes
After you are done with priming, you will need to start filling up the holes and cracks properly. This helps in creating a seamless surface. You can also do the same before applying the primer if you do prefer it. You can use the epoxy grout to fill up the holes sternly.
The larger cracks are usually easier to fill up. However, the smaller ones can pose to be a problem for you. So, to take care of them, you will need to slice them up with a diamond cutter.
This way, it will be easier for you to create enough space and amplify the group’s overall anchoring quality.
Step: 5 – Apply the Epoxy Paint
Now, the time has come for you to apply the epoxy floor paint properly. But, how are you going to do so? To begin with, you will need to use an electric mixer and blend the paint thoroughly. Be sure to continue the same for at least two minutes.
After that, you will need to use a high-end roller to absorb the paint and apply the same on the floor.
However, it would be better for you to give the flooring at least 24 hours before re-coating it again. It can help you to fill up the newly cracked holes again and paint everything impeccably.
Conclusion
So, these are a few steps that you will need to follow if you are trying to apply the epoxy floor paint for the first time. However, we would still suggest you opt for an expert in this aspect. It will ensure high-quality work without the risk of jeopardizing anything.
